UNLIMITED PRO PLAN

UNLOCK EVERYTHING

LEARN MORE
Photography lighting principles and concepts with chris knight. What is diffused light? PRO EDU photography tutorials.

Photography Lighting Equipment & Setups: The Essential Guide with Chris Knight

PHOTOGRAPHY LIGHTING CONCEPTS EVERY PHOTOGRAPHER SHOULD KNOW

Nothing is so fundamental to studio portraiture as light. Light is the language photographers use to communicate who our subject is and what we want the viewer to understand about them, or us. Part of every photographer’s career is the lifelong study of light, which is why consistently going back to the fundamentals is always a good idea.

How To Get Started With Photography Lighting

The fundamentals of light make up the foundation every lighting scenario is built upon. Quality of light, quantity, color, and direction are like the syntax of light, the framework within which we communicate. And what we say depends on how we combine those elements. Light reveals, shadow conceals, but together they tell a story.

The first thing to remember is that, in a studio setting, light is created by tools like strobes or constant lights, and manipulated with modifiers like soft boxes, reflectors, and flags. That means understanding and mastering these tools is essential to communicating with light. Let’s start with a quick and simple breakdown of terms with chris knight.

 

 

In the introductory chapter to Dramatic Lighting with Chris Knight, we've combined 12 chapters into 1 condensed video, because it is a masterclass on the basics of lighting. If you can nail down these concepts to where this becomes intuition and second hand nature, you can build an incredible well lit photography portfolio. View this entire tutorial HERE, at PRO EDU.

“What we’re going to do is break it down, and go step by step and dissect the tools we use, and how they can apply to how you speak the language of light.”

— CHRIS KNIGHT

 

Photography Lighting Terminology Photographers Need To Know

  • Light Quality: whether light is hard or soft as determined by the transition from highlight to shadow. Hard light transitions to a distinct, sharp edged shadow, while soft light transitions more smoothly with a “blended” edge.
  • Quantity: how much light is in a scene. A low-key scene will have little light overall, while a high-key scene will have little shadow.
  • Color: what the color temperature of the light is measured in K, or Kelvin, with cold light having a higher number and warm light having a lower numerical value. Daylight is measured at 6500K.
  • Direction: where the light is coming from in relation to the subject.

Every lighting scenario we see is made from a combination of these 4 characteristics.

 What is soft light versus hard light example in photography lighting

The Five Properties Of Photography Lighting 

The five properties, or behaviors of light are diffusion, reflection, refraction, transmission, and absorption. When light comes in contact with objects in an environment, it reacts in certain ways. These are rules. It's also science, so understanding lighting from a scientific standpoint can help you grasp many of these concepts so you can modify and manipulate them as you see fit.

These reactions are the ways photographers manipulate light. Photography modifiers all enhance, embrace, prevent, or manipulate light in these ways to create what is known as qualities of light.

 

The 5 Properties of light in photography - Diffusion Reflection refraction transmission absorption

What Is Diffusion Lighting?

The nature of diffused light can be understood by first answering the question, "What in the heck is diffuse light and why does it behave this way?" The answer is science! It has to do with the electromagnetic radiation behaving as waves. Its amplitude gives brightness and color differences due to different wavelengths which make up each color in traditional theory.

What is Diffusion Lighting? Diffuse Light Example for photographers

Diffused light is the preferred lighting type for many artists and photographers. It has a soft, even glow that does not cast harsh shadows or produce bright spots on reflective surfaces such as mirrors because it's scattered by all directions instead of being focused into one direction like direct sunlight would be with its intense glare. The best example of this are clouds AKA natures large soft box.

 

What Is Reflection Lighting?

The most basic example of visible light reflection can be seen on "glass-like" calm pools of water where incident rays are reflected back at you with perfect clarity; however if there's anything disrupting this behavior such as someone doing a cannon ball into the pool, then we see how scattered and chaotic those returning packets of light become after being perturbed by each stroke taken towards its target. 

What is reflection lighting? Photography terms explained

What Is Refraction Lighting?

The process of refraction affects the path that light takes when going through different types or media. Light changes its color as it passes from one substance to another. For example, water waves bend and refract depending on their wavelength which means that they cannot pass through air easily at all but if something is more dense than the surrounding environment then there will be some distortion possible with these sorts of materials like glass or water. 

What is Light Refraction in Photography?

Refraction is a concept that is most challenging for beverage photographers. Many who attempt beverage photography of bottles and glasses learn firsthand about light's weird and almost counterintuitive properties. It's almost as if the light is working in the opposite way and illuminating parts of the bottle or glass that you wouldn't think possible. This is a fun way to explore how light works. Try to light a bottle!

What is light refraction?

 

What Is Transmission Lighting?

Transmittance is how much light goes through a filter. For example, if someone has a 50% transmittance, that means that they let 50% of the light into their lens and camera. Photographers might use ND filters to cut down on the amount of light coming in so they can control shutter speed, aperture or ISO. Shutter speed controls how much light you want to let in, so if you preferring a specific shutter speed, controlling the transmission with the use of glass is a concept you will need to embrace.

What is transmission lighting in photography?

One great example of combining transmission lighting and diffusion lighting is building an atmosphere with fog or haze. Both of these have different transmission properties of light depending on the quality of your hazer and the amount you are using. The haze with allow the light to transmit while diffusing it creating your ability to see the light in the air. This is key in creating an atmosphere with texture in your photography and can be used in a myriad of ways to provide a light quality to your scene by combining these two principles.

Transmission and diffusion lighting examples in photography

Transmission of light occurs when electromagnetic waves (visible light, radio waves, ultraviolet) move through a material. This transmission can be reduced if the waves are reflected off the surface or absorbed by molecules in the material.

What Is Light Absorption?

When there is absorption, the light wave enters the electron. The energy level of the electrons are at or near that of the incoming light wave frequency. The electrons will absorb the energy from the light wave and change their state.

There are two outcomes which can happen next: either change back to ground state emitting a photon of light or retain this new energy by continuing to stay in this excited state. If it does not immediately re-emit, then it may be reflected or scattered. If it is absorbed, then you will feel heat because of this new energy being manifested as heat in matter.

AKA Negative Fill Light

What is light absorption or Negative fill lighting

You will often see flags and black V flats as staples in photo studios. This is to control light, shape it, and prevent it from being reflected. Remember that shadows are just as much about shaping light and work in the same way as light, just opposite. There are so many ways to control this so learning how to control, prevent, and diffuse lighting all over your set is critical. 

Often, more than one of these behaviors happens at the same time. For instance, a scrim both transmits and diffuses light. A white Vflat both reflects and diffuses light.

It’s the photographer’s job to understand the qualities of light, and the behavior of light so they can make creative decisions about how to manipulate each quality of light to communicate.

Some Additional Studio Lighting Terms

  • Strobe: a light source that produces light in a burst, or flash, specifically for photography.
  • Constant light: a light source that produces continuous light for photography or videography.
  • Practicals: any light that comes from a practical source such as lamps, candles, fire, etc.

 Studio lighting outdoors with mixed ambient

Hard, broad light mixed with ambient light fill

 

Common Lighting Modifiers & Terms

Modifiers are tools that go between the light source and the subject in a way that alters or modifies the light by reflecting, refracting, diffusing, enlarging, condensing, or removing light.

  • Soft Boxes, Octa boxes, Umbrellas, Parabolics, beauty dishes, reflectors, etc: these modifiers all serve to enlarge the light source in relation to the subject and direct the light. The modifier is placed directly on the light. Light fills up the modifier and then is either fired directly at the subject, or reflected from the inner surface of the modifier before traveling to the subject. Each of these modifiers gives shape to the light and can also add other distinctive characteristics depending on the surface material, shape, and diffusion material used. Extra diffusion can be added, as well
  • Snoots: these modifiers condense light.
  • Reflectors: objects used to reflect light, sometimes white but often metallic in nature
  • Flags: used to block or absorb light
  • Diffusers: used to transmit and scatter light, such as scrims.
  • Grids: fitted to a modifier and used to direct light and diminish spill
  • Gels: used to add color to or neutralize color in light

Once a photographer has a solid grasp of the qualities of light, understands light behavior and how it can be manipulated, they’re capable of creating anything and telling any story with light.

Common Lighting Patterns

So, how does a photographer go about choosing and building a studio lighting setup? The first step is knowing what the intention of the image is, and the second step is choosing lighting patterns that communicate that intention.

There are several common portrait lighting patterns most photographers will recognize. Here are just a few:

  • Rembrandt Lighting: creates a little triangle of light on the cheek of the subject opposite the key light
  • Loop Lighting: where a little loop-shaped shadow is created beneath the subjects nose and off to one side. This is similar to Rembrandt light but doesn’t result in a triangle of light.
  • Butterfly Lighting: light from directly in front of and above the subject and casts a shadow beneath the nose shaped like a butterfly. Also known as Beauty Light.
  • Split Lighting: where light comes from 90 degrees to the subject and lights one side of the face.
  • Flat Lighting: where light comes from directly in front of the subject.

 

There are also two common directions for lighting patterns: broad lighting, where the light is positioned from the camera side and lights a broad section of the client's face, and short lighting, where the light comes from behind the subject and lights the off camera side of the client’s face. 

 

The-difference-between-Rembrandt-loop-butterfly-flat-and-split-lighting 

 

Photography Lighting Names You Need To Know 

The final important terms to know are what certain lights are called depending on their role in the lighting setup.

  • Key Light: the main source of light
  • Fill Light: determines how dark the shadows are by adding or removing light.
  • Accent Light: can take the form of edge light, rim light, hair light, or anything else that needs additional shape and dimension.

How To Build Your Lighting

Now that the basics have been established, it’s time to talk about building a portrait light setup. It’s important to build the light scenario one light at a time to ensure each light is doing its job. It can be tricky to troubleshoot lighting issues when all lights are firing, so it’s best to check things one at a time.

  1. Know the intent of the image.
  • Why are you making this portrait? What is the goal of the image, and what are you trying to say about the subject? Is there anything that needs to be showcased or hidden?
  • Choose a light pattern that suits the intent.
  • If the goal is to create a sense of mystery and drama, a high-key, soft-light set-up may not be the best choice. Make certain the light you choose matches your intentions.
  • Establish the Key Light.
  • Choose where the main light source will be. Make sure to consider the quality, quantity, color, and direction of the light. Will the light be hard, or soft? Warm or cold? Is the light flattering, or showcasing something important about the subject?
  • Take a photo so you can see whether the key light is having the intended effect, and make any adjustments.
  • This is a great opportunity to use a light meter if you prefer, but be certain to analyze the image and see that you’re retaining detail in the highlights, and not clipping the shadows. Make sure the effect of the light on your subject is what you intend, and make any adjustments you need such as changing the angle, adding diffusion, or switching the modifier.
  • Determine if Fill Light is needed.
  • How dark are the shadows, and does that suit the intent of the image? If not, how much fill light is needed to open the shadows? Do you want to add another light source, or just use a reflector or vflat to bounce light back into the shadows?
  • Take a photo with the Fill Light on, analyze and make adjustments. Do you need more light, or less?
  • Place Accent Lights.
  • Is there anything in the image that needs additional lighting? Do you need to separate the hair from the backdrop, show off the detail in a coat, or light the backdrop?
  • Take a photo to determine whether the accent lights are doing their job, or if adjustments need to be made.

Throughout the process, continue to assess whether the results are in-line with the intention of the photograph. If they’re not, make adjustments based on knowledge of how light behaves and how it can be manipulated.

CONCLUSION

Understanding the language of light and how you can use it to communicate is the most important skill a photographer can learn. In portrait photography, light says as much about the photographer as it shows of the subject.

Without light, photography doesn't exist. So get out there and master your medium.

Interested in learning more about lighting? Check out our Dramatic Portraiture tutorial now, or scroll down and answer a short survey to get a free section.

Dramatic Portraiture With Chris Knight